Plymouth Acclaim 1993 Serpentine & Timing Belt Diagrams

Check out this Serpentine & Timing Belt Diagrams for 1993 Plymouth Acclaim Automobile.

The Plymouth Acclaim was a mid-size sedan produced in the 1989 to 1995 model years. The Acclaim was Plymouth's updated replacement for both the similarly sized E-body Caravelle and the K-body Reliant.[2] Badge engineering was employed to give Dodge and Chrysler their own versions of the AA-body Acclaim: the Dodge Spirit, the Chrysler LeBaron sedan, and the export-market Chrysler Saratoga. It was replaced by the Plymouth Breeze in 1996.

Alternator - Tensioner

2000 Camaro 3.8L Serpentine Belt Diagrams

Simply rotate the tensioner pulley and slip the old belt off. Check all of your pulleys and make sure there is no debris on any of them. Slip the belt over all of the pulleys leaving the tensioner pulley for last.

Make sure the belt is properly on all the other pulleys, rotate the tensioner pulley and slide the new belt over it. Inspect the entire belt to make sure that it is on every pulley correctly. You can rotate the tensioner pulley a little to relieve tension enough to make any adjustments to your belt.

2000 Camaro 3.8L Serpentine Belt Diagrams With and Without AC

2002 Chevrolet Camaro 5.7L Serpentine Belt Diagram

Using a socket and ratchet or tensioner pulley tool, rotate the the tensioner pulley and slip off the belt. Inspect all the pulleys and make sure they are clean and not damaged.

To install a new belt simply route the belt around all the pulleys according to the diagram above leaving the tensioner pulley for last. Check all the pulleys again to make sure the belt is on all of them correctly and rotate the tensioner pulley and slide on the belt.

Inspect the belt and make sure it is on every pulley correctly before starting your vehicle. Adjustments are made by simply rotating the tensioner pulley just enough to give the belt some slack and slide into position.

2002 Chevrolet Camaro 5.7L Serpentine Belt Diagram AC Belt